2sa2037 / 2sC5694 no.6587-1/5 applications ? relay drivers, lamp drivers, motor drivers and printer drivers. features ? adoption of mbit process. ? large current capacity. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? high allowable power dissipation. specifications ( ):2sa2037 absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo ( - 50)60 v collector-to-emitter voltage v ceo ( - )50 v emitter-to-base voltage v ebo ( - )6 v collector current i c ( - )7 a collector current (pulse) i cp ( - )10 a base current i b ( - )1.2 a collector dissipation p c 1.2 w tc=25 c10w junction temperature tj 150 c storage temperature tstg - 55 to +150 c ordering number : enn6587 2sa2037 / 2sC5694 dc / dc converter applications package dimensions unit : mm 2042b [2sa2037 / 2sC5694] 82200 ts im ta-2916 pnp / npn epitaxial planar silicon transistors 1 : emitter 2 : collector 3 : base sanyo : to-126ml 4.0 1.0 1.0 8.0 1.6 0.8 0.8 0.75 1.5 7.5 3.0 1.4 11.0 15.5 3.3 3.0 0.7 2.4 4.8 1.7 1 2 3 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan
2sa2037 / 2sC5694 no.6587-2/5 v r r b v cc =20v v be = --5v ++ 50 input output r l 100 f 470 f pw=20 s i b1 d.c. 1% i b2 10i b1 = --10i b2 =i c =2a for pnp, the polarity is reversed. 0 0.4 0.8 1.2 1.6 2.0 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 0 --0.4 --0.8 --1.2 --1.6 --2.0 i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a it02345 0 1 2 3 4 5 6 7 i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a it02346 from top --200ma --180ma --160ma --140ma from left 200ma 180ma 160ma --100ma --120ma 120ma 140ma 100ma 80ma 60ma 40ma 20ma 10ma 5ma --80ma --10ma --20ma --40ma --60ma --5ma i b =0 i b =0 electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)40v, i e =0 (--)0.1 m a emitter cutoff current i ebo v eb =(--)4v, i c =0 (--)0.1 m a dc current gain h fe v ce =(--)2v, i c =(--)1a 150 300 gain-bandwidth product f t v ce =(--)10v, i c =(--)500ma (290)330 mhz output capacitance cob v cb =(--)10v, f=1mhz (50)28 pf collector-to-emitter saturation voltage v ce (sat) i c =(--)2.5a, i b =(--)125ma (--150)130 (--300)260 mv base-to-emitter saturation voltage v be (sat) i c =(--)2.5a, i b =(--)125ma (--)0.85 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0 (--50)60 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0 (--)6 v turn-on time t on see specified test circuit. 30 ns storage time t stg see specified test circuit. (250)300 ns fall time t f see specified test circuit. 15 ns swicthing time test circuit
2sa2037 / 2sC5694 no.6587-3/5 0.1 257 3257 3257 3 1.0 100 10 cob -- v cb output capacitance, cob -- pf collector-to-base voltage, v cb -- v 7 3 100 2 5 7 3 2 5 10 1000 it02354 --0.1 257 3257 3257 3 --1.0 --100 --10 f t -- i c gain bandwidth product, f t -- mhz collector current, i c -- a 7 3 100 2 5 7 3 2 5 10 1000 --10 257 3 --100 257 3 --1000 257 3 --10000 it02351 2sa2037 v ce = --2v f t -- i c gain bandwidth product, f t -- mhz collector current, i c -- a 7 3 100 2 5 7 3 2 5 10 1000 0.01 257 3 0.1 257 3 1.0 257 3 10 it02352 2sC5694 v ce =2v cob -- v cb output capacitance, cob -- pf collector-to-base voltage, v cb -- v 7 3 100 2 5 7 3 2 5 10 1000 it02353 2sa2037 f=1mhz 2sC5694 f=1mhz 1000 100 7 5 3 2 7 5 3 2 10 0.01 3 25 10 0.1 73 257 3 257 1.0 h fe -- i c collector current, i c -- a dc current gain, h fe it02350 ta=75 c --25 c 2sC5694 v ce =2v 7 5 3 2 10 1000 100 7 5 3 2 --0.01 3 25 --10 --0.1 73 257 3 257 --1.0 h fe -- i c collector current, i c -- a dc current gain, h fe it02349 ta=75 c 25 c --25 c 2sa2037 v ce = --2v 25 c 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 0 --0.2 --0.4 --0.6 --0.8 --1.2 --1.0 i c -- v be base-to-emitter voltage, v be -- v collector current, i c -- a it02347 ta=75 c 25 c --25 c 0 1 2 3 4 5 6 7 0 0.2 0.4 0.6 0.8 1.2 1.0 i c -- v be base-to-emitter voltage, v be -- v collector current, i c -- a it02348 2sa2037 v ce = --2v 2sC5694 v ce =2v ta=75 c 25 c --25 c
2sa2037 / 2sC5694 no.6587-4/5 7 3 1.0 2 5 7 3 2 5 0.1 10 0.01 0.1 23 57 23 57 23 57 1.0 10 v ce (sat) -- i c collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v it02360 2sC5694 i c / i b =20 --0.01 --0.1 23 57 23 57 23 57 --1.0 --10 v ce (sat) -- i c collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v it02359 7 3 --1.0 2 5 7 3 2 5 --0.1 --10 2sa2037 i c / i b =20 a s o collector current, i c -- a collector-to-emitter voltage, v ce -- v 7 5 3 2 0.1 1.0 7 5 3 2 7 5 3 2 10 2 1.0 10 100 25 37 25 37 it02361 i c i cp dc operation 500 s 100ms 10ms 100 s 10 s 7 3 10 2 5 100 7 3 2 5 1000 7 3 2 5 10000 7 3 --10 2 5 --100 7 3 2 5 --1000 7 3 2 5 --10000 v be (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a --0.01 257 3 --0.1 257 3 --1.0 257 3 --10 it02357 2sa2037 i c / i b =50 v be (sat) -- i c 0.01 257 3 0.1 257 3 1.0 257 3 10 it02358 2sC5694 i c / i b =50 ta=75 c --25 c 25 c ta=75 c --25 c 25 c ta= --25 c 75 c 25 c ta= --25 c 75 c 25 c 1ms 2sa2037 / 2sC5694 tc=25 c single pulse for pnp, minus sign is omitted collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a 7 3 100 2 5 7 3 2 5 10 1000 0.01 0.1 23 57 23 57 23 57 1.0 10 v ce (sat) -- i c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv it02356 2sC5694 i c / i b =20 --0.01 --0.1 23 57 23 57 23 57 --1.0 --10 v ce (sat) -- i c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv it02355 7 3 --100 2 5 7 3 2 5 --10 --1000 2sa2037 i c / i b =20 ta=75 c --25 c 25 c ta=75 c --25 c 25 c 0 1.6 1.2 1.4 1.0 0.8 0.6 0.4 0.2 collector dissipation, p c -- w ambient temperature, ta -- c 20 060 40 80 100 140 120 160 p c -- ta it02362 2sa2037 / 2sC5694 no heat sink
2sa2037 / 2sC5694 no.6587-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of august, 2000. specifications and information herein are subject to change without notice. ps collector dissipation, p c -- w case temperature, tc -- c 0 10 8 12 4 2 6 20 060 40 80 100 140 120 160 p c -- tc it02502 2sa2037 / 2sC5694
|
